Sink for kitchen from stainless steel

As a rule, the sink for the kitchen is made of stainless steel. This material is considered the most popular, not without reason: such a sink does not require special care, it is resistant to various kinds of dyes and abrasive substances, and at a price it is quite acceptable for many.

Stainless steel sink can be called both durable and hygienic. There is a demand - it means there is a choice, and it is very rich: models are round, square, mortise, overhead, with wings, without wings, angular, double, one and a half ...

The disadvantage is, of course, the noise that they make during operation. If water gets on steel, it immediately resonates, although, according to manufacturers, such a problem can only affect models with a thin metal.

9 a photo

Nuances when choosing

  1. No matter what anyone says, and stainless steel products are very convenient and very reliable, and therefore they are given the “palm of the championship” by many hostesses.The stainless steel sink has many distinctive features. It is almost like stone, has great strength, is resistant to corrosion and is not afraid of mechanical effects.
  2. But before you go to the point of sale to choose a kitchen sink, you still need to learn how to correctly distinguish the quality indicators of the product.

Matt option

Not one thing is important here: there are many requirements for a real wash:

  1. it should be mandatory made of a certain steel grade, which is allowed for use in food production;
  2. There should be no heavy impurities in the steel from which the concrete shell is made. The steel grade number should be 304, because it is such steel that will be absolutely safe and meet all the requirements that are imposed in this case. It is distinguished by such qualities: elasticity, durability, hygiene, resistance to the aggressive effects of any aggressive environment, to corrosion and to the formation of rust on it.

But this steel has a significant disadvantage - it is relatively expensive.

7 a photo

About more budget models

There are a lot of washers in shops (with or without a cabinet) made from other steel grades. For example, the 202 mark - it is not so expensive and is in great demand in mechanical engineering.It is different in chemical composition and it does not have such quality characteristics in terms of mechanical strength and resistance to corrosion processes. Such a sink will differ significantly from the one that was made of 304 steel.

7 a photo

disadvantages

Products made of 202 steel grades are subject to the formation of cracks on the surface under certain conditions. This steel is most often used in food production - it is used to make dishes, and at first glance it cannot be distinguished from the 304 mark, but the difference will become apparent as soon as the sink starts to be used.

Something similar will happen with a sink of 202 steel grades - it will start to unpleasantly surprise its owners with incomprehensible divorces that will appear on its surface, stained and changed its original color. The farther - the more disappointments will be: on the places of bends and seams rust will appear along with corrosive divorces, which, in the end, will lead to the complete destruction of the metal in about a year - through holes and corrosion will appear.

9 a photo

How not to make a mistake when choosing?

To make your choice correctly, before buying a stainless steel sink it is recommended to decide on some questions:

  • Should your sink be matte or polished? A polished car wash will have a more attractive look at first than a matte wash, but it will also require much more care.

Each time, for example, the surface of a polished sink will need to be thoroughly wiped dry, otherwise it will show a trace of each droplet of water and every smallest scratch. But here limescale from a polished sink will be cleaned much faster than from a matte surface.

  • Let the future hostess herself choose the kitchen sink, because it is she who knows how much she would like to have bowls so that her work in the kitchen - either with food or with dishes, would be as comfortable as possible. She also knows better and what form to get the sink: round, square or rectangular (this model is most often chosen, the most running size is 60 by 80 cm), and maybe she will choose an angular model.

Choosing a sink, we should not forget about what kind of mixer fits best for this sink. And yet - it is quite possible that the hostess has long dreamed of washing with a wing and a lot of additional accessories to her, such as a special tank, which will contain liquid soap, a filter that cleans water, a shredder for waste and many others.

  • About the depth of the bowl

This option for the kitchen sink is very important and requires special attention when choosing one of the models. It is believed that the depth of the sink should not be less than 18 cm. This calculation is due to the fact that with a shallower depth of the sink, the sides will not be able to keep the spray, and they will fly out of it throughout the kitchen.

  • There are two types of stainless steel sinks: some are called consignment notes, others are mortise.

When choosing a mortise model, you should take into account its dimensions, in order to later order furniture of a suitable size. And if the furniture is already there, then you need to calculate that the sink fits into the hole that is prepared.

In the case of the choice of an overhead washing no problems should arise, because such a model can be installed on any kitchen module. For the price, such a sink is quite acceptable, and it is not difficult to install it at all, so even a beginner can do such work perfectly.

A great option when you purchased an inexpensive kitchen from economy class, consisting of ready-made modules, standard. That's just to wash the dishes in this case should be very careful that the water does not flow into the cracks between the cabinets.If you do not follow this, the furniture can simply swell and lose, thus, any appeal.

7 a photo

Where to go shopping?

On the market - in the last turn. It is best to use the services of special outlets - this will give you the opportunity to hedge yourself and protect against the purchase of a product, the quality of which will be, to put it mildly, not up to par.

It's okay if in the first store you could not choose anything from the goods offered there. The choice of stainless steel sinks is so huge that if you search a little more, you will soon find exactly what you were looking for - a stainless steel kitchen sink that fits you in all respects. Such products are an excellent choice, and only stone products can be better than these products.

Thickness

This value among all indicators of steel for any wash is one of the most important components of the selection. Steel sheet thickness in different washes can vary from 0.4 mm to 1.2 mm. The cost of washing will be the higher, the thicker the steel was used in its manufacture.

But in this case it is better not to save money, because problems will begin with thin steel.It will make noise from the water jets falling on it, and vibrate, and even sag under the weight, for example, pots with water, and from the temperature drop, the thin steel sink can even start to “walk” and rise above the surface of the tabletop, breaking the hermetic joint.

It should be remembered that high-quality stainless steel sink - the one whose thickness will be at least 0.6 mm. Products are thinner and will cost less, as a rule, their manufacturers are China and Russia.

Surface finish

Kitchen sinks exist in five versions:

  • Matte sink - stainless steel product that does not have additional polishing;
  • Polished sink - a product from the same material, but with polishing;
  • Mirror wash - stainless steel product, polished to a brilliant state;
  • Decorated sink - stainless steel product with a surface similar to the structure of flax. This is a very practical surface on which imperceptibly no drops or scratches. Such a pattern with a relief on an engraved surface is achieved by rolling (or rolling) when a stainless steel sheet is passed between rollers that rotate in different directions and “print” the pattern on the sheet.

The picture goes to a depth of about 0.2 mm, so small scratches on the surface are almost imperceptible. This technology with many stages of the production of washing leads to its higher cost - it turns out 15 percent more expensive than smooth specimens.

  • Sink with microtexture - the same sink from stainless steel, but having more noble surface in appearance.

Mounting method

In the case of integrated sinks, their position relative to the surface of the table is both lower and higher, or flush with its surface. But in terms of complexity, this type of installation is the most time-consuming, and it is unlikely that it will be possible to cope with such installation. This is the case when one cannot do without a specialist - it will be necessary to cut out the space under the sink on the coordinate milling machine.

The most interesting and difficult way to install such a model of washing is to install under the countertop - this method is in principle different from all other installation methods. In this case, the installation goes under the tabletop. Installation under the table is used when the tabletop is granite, plastic or wooden, but most often in a headset with a stone tabletop.

An installation embedded under the table shows how beautiful the stone is on its cross section. Sinks installed under the table top have the same advantages as the mortise ones - they are hygienic, they are convenient to maintain and they do not require special care.

The built-in sink today is the most popular, it can be seen in almost any kitchen where there is a set with a common worktop, which is so characteristic of a modern interior.

Right size

Each owner has the right to choose a sink of such dimensions that he likes, but, naturally, the dimensions of the sink can not exceed the dimensions of the drawer on which the sink will be installed. In order for this not to happen, it is necessary to make some measurements. First of all, the width of the cabinet is determined, and then the right and left length of the fragment or the whole table top. The second measurement will be needed in case of purchasing a bowl with wings or one wing.

When choosing a sink should consider some recommendations:

  1. The sink should not reach the wall by about 3 or even 5 cm, therefore, for a cabinet 50 cm wide, choose a sink 45 cm wide.
  2. The front sides of the bowl should not go outside, but should end in centimeters in three to the edge of the table.
  3. A tight bowl can only fit the apron, although, according to experts, this is best avoided.
  4. The surface type washer should match the size of the cabinet.
  5. Such full-size kitchens in which the bowl is combined with a cupboard or cabinet (washing-prism) have a standard size - 800x600. In this case, if the table is made together with the table top, such a sink can also fit into the middle kitchen.

For washing equally important concepts such as its shape and its size. The shape is important for convenience during operation of the sink, and size is important for its capacity. The dimensions of the sinks depend on their shape, for example, for washing of a square type, the standard is a size 40x40, 50x50 or 60 × 60, although there may be others. Such sinks are quite roomy and they are chosen by many hostesses. There are a lot of them on sale, of different designs, of different materials and with different functionalities. Perfectly fit into a small-sized kitchen.

And for rectangular sinks, the standard sizes are 50 × 125, 50 × 100, 60x80, 50x60. Table under this sink should be narrow and long. Look good in a non-standard room or in a small kitchen. Can have two bowls or more.

8 a photo

Popular models

According to the type of installation, different types of kitchen sinks are popular:

  1. Mortise washers - perhaps the most popular option. They can be installed independently in a table made of any material.
  2. For convenience, the sink can be large or small, with or without a wing. Some housewives seem more comfortable round sinks, because, as a rule, they are more spacious with the same volume as the bowl of a different shape. In addition, the popularity of washing depends on which interior it fits. So, the triangular sink is a popular option when you need to use the corner of the kitchen, and it will take very little space in it.

You should not choose too deep sinks, because in this case you will have to constantly bend over, and this is completely inconvenient. In addition, if there is a hinged shelf above the sink, there is a chance that you will touch it every now and then.

A poor choice would be too small sink, which does not fit high dishes.

Everyone chooses a sink according to their preferences, someone likes matte sinks, and someone likes mirror ones. The main thing is that the purchase harmoniously fit into the kitchen.

Choose a form

For modern technology, nothing is impossible and the shape of the shell can be anything. The most common are kitchen sinks of the following models:

  • Classic square or rectangular. These sinks differ in functionality and spaciousness. These models often have additional bowls and other equipment.
  • Round or oval. Such models are considered the best option for a small kitchen. As a rule, these are small sinks and without additional compartments. It is easy to look after round models - they have no corners in which would accumulate
  • Triangular (corner). Excellent save kitchen space, for which she is very fond of the mistress of "Khrushchev".
  • Pentagonal Such models equip spacious and bright kitchens. These sinks are the most functional, often have lateral wings and several bowls at once.

How many bowls do you need

The double kitchen sink was liked by many housewives for its practicality. This option is convenient for many reasons. For example, in one sink you can soak the dishes, and in the other wash it. And you can take water in one bowl and wash the dishes in it, rinsing under running water in another bowl.This, by the way, is a great way to save water.

Another application of one of the bowls is to defrost food in it or to peel vegetables (if the material of the bowl is not afraid of staining and does not absorb odors). Double stainless steel sink is perfect for this, as much as possible satisfying all the rational requirements for the organization of work and hygiene.

If there is not enough space in the kitchen, it can be equipped with a sink with small bowls and without an auxiliary wing. An excellent solution for the interior of a small kitchen will be a two-piece sink, thanks to which the working surface will be significantly saved in the kitchen and will involve an empty, as a rule, joint in the corner of the tabletop.

Manufacturers Overview

The Czech Alveus set is made of stainless steel, whose thickness is equal to 1 mm. Models differ in durability and wear resistance. The surface of such a sink is made as satin (can be smooth matte or glossy), classic linen or microlane. Surface finish determines the color of the product, in all shades of 16, it can be either standard chrome, or copper or gold.

The Swiss company Blanco offers sinks, faucets and other accessories in a large assortment. This product has always been in demand among buyers, traditionally located on the top lines of the rating. These products are sold in more than 100 countries and have excellent design and quality. The company places particular emphasis on stainless steel models, considering such products to be classic. The technologies that the company owns allow to diversify the sinks, as a result of which polished sinks, notches, mirror sinks, and also matte ones are obtained.

Franke - this German company has a huge experience in the production of kitchen sinks. Germany produces luxury products with an original design and excellent performance. It is not surprising that the feedback on German products is extremely positive, or rather, even enthusiastic, and this also applies to the shape of the product, its quality and functionality.

Currently, German craftsmen make high-quality shells in a large assortment. The materials they use are different, but they started from stainless steel, so the experience with this material has already accumulated considerable.There are a lot of models today, and in terms of functionality, they can bring any hostess into a pleasant state of shock.

Teka - this German company began producing kitchen sinks as early as 1924, and today it continues its activity in 25 enterprises located in three continents. Thus, buyers in 110 countries have the opportunity to use this first-class kitchen equipment.

Anyone who would like to buy a stainless sink of any shape, so that its cost is nicely balanced with its quality, we can recommend Iddis kitchen sink. Any model: mortise, corner, round or other you will be offered in specialized and professional stores throughout Russia and the CIS.

The kitchen sink is something that is always in sight. After all, Russia is a country where it is customary to sit in a tight circle with friends in the kitchen. Manufacturers come up with all the new design models, one better than the other. But the customers have to decide which model from which manufacturer they would like to purchase, what form it should be, what size, and then already - what design will be at the kitchen sink.

11 a photo
Comments
 Comment author

Kitchen

Wardrobe

Living room