Top Kitchen Faucet Manufacturers

Making the choice of faucets for the kitchen was not as easy as 10 years ago, when 1 - 2 manufacturers were introduced to the market, producing standard models.

Now the number of options is amazing: the types, shape, material, methods of installation are so diverse that it is very easy to get lost. Both domestic and foreign companies are represented on the market.

Let's try to sort through all this variety.

Quality kitchen faucets meet certain criteria:

1. Wear resistance - The crane must be of increased strength. Famous trademarks give special importance to this indicator, therefore such products will last a long time.
2. Economy - in order to use water sparingly, the mixers are equipped with special aerators, which supply a little foam jet, filling it with air bubbles.Liquid consumption is reduced without affecting hygienic properties. Models appeared that are capable of delivering the jet in small twisted spirals, as if looming around the circumference of a grid of water. The pressure looks unusual, and at the same time the costs for water supply decrease.
3. Ease of use - convenient kitchen faucets, which simply and quickly open, and without much difficulty, you can set a certain temperature of the jet. An excellent model can be a non-contact or touchscreen faucet, in which the degree of heat is set in advance, and there is no need to constantly adjust it, you just hold your hands to the mixer and the water will flow.
4. Strength - high-quality kitchen faucet is not afraid of mechanical stress: constant pressure and friction.
5. Modern design - the crane should not stand out from the general interior of the room. Ideally, this device should be combined with a sink, and be made of similar or similar in appearance materials.

It is worth paying attention to the internal "filling" of the mixer:

• Choosing a valve valve, it is better to stay on the model that contains the axle boxes with a ceramic valve.Products with a rubber gasket can leak very soon, as this element wears out quickly. In this embodiment, it is quite difficult to adjust the temperature of the jet, as the rubber seal expands under the action of hot water, and the heat level increases, you will have to constantly adjust the required temperature.

• Buying single-lever valve, pay attention to the cartridge. It is better not to acquire a device whose cartridge is made of plastic, as soon you will have to replace the purchase.

Choosing a quality product for the kitchen, be guided by a set of simple rules:

1. Purchase products from reputable manufacturerswhich guarantee a long service life.
2. Not worth saving - A cheap model can quickly wear out and have to install a new product. The money spent will soon pay off, allowing you to spend less on paying water bills.
3. A quality crane should be fully equipped. (have cartridges, gaskets, flexible hoses). Included is a manual for installation and operation, as well as a warranty period.
4. The hole in the sink should fully comply with the diameter of the product.
5. Check the diameter of the nuts for the joint (standard size 0.5 inch), if it does not match, then you will need to buy a special adapter in addition.

Manufacturers offer a variety of shapes and lengths of kitchen faucets.

The shape of the cranes can resemble the Russian letter "G" or the letters of the Latin alphabet:

• C;
• J;
• R;
• S.

An extraordinary option is a mixer with a square tube, instead of a rounded model.

The height of these cranes are:

• low - up to 19 cm;
• medium - up to 24 cm;
• high - more than 24 cm.

Depending on the method of opening and temperature control of the jet, three types of faucets are distinguished:

This is a classic option, a stream of cold and hot water is supplied if you open two valves.The flywheels of this device can be made of metal, ceramic or plastic of various shapes. Each valve is responsible for supplying cold or hot water separately, which are combined in the central chamber and flow into the spout. Such model will become excellent option if the gas column is used.

The main advantages of this type of mixers are:

• relatively low price in comparison with other analogues;
• simplicity in repair - components that failed can be changed easily;
• will become an indispensable part for the kitchen, which is made in retro style, as manufacturers offer different options in vintage design.

The most popular and popular models due to convenient use. The flow and temperature of the jet can be changed with one hand. To adjust the level of heat supplied by the liquid, simply turn the lever in the horizontal plane. To open or close the water, you will need to raise it or lower it accordingly. There are ball models in which only the intensity of water inflow changes.

A special device, which is located at the bottom of the sink, combines cold and hot flow. Using its flywheel, you can adjust the heat. From the tap will come a jet of a given temperature. The main advantage of this model is the inability to burn hands, this is especially true for a family with small children.

It is enough to bring your hands to the faucet or lightly touch the mixer, and the flow will be realized. The touch panel can be located on the body of the faucet, the head of the spout or be part of the sink. Despite the relatively high price, compared with mechanical counterparts, such a device is very convenient to use:

• no need to touch the faucet with dirty hands and make efforts to clean it;
• there is no risk of forgetting to close the tap - as soon as the movement under the mixer stops, the jet flow stops.

This parameter must be taken into account when choosing a specific mixer.

There are several ways to mount such a device:

• Directly to the sink in a dedicated hole.

• On the worktop next to the sink - be sure to check the possibility of such an installation, since the length of the threaded part may not be enough to fix to a thick work surface.

• Attaching to the wall will be the best option if the flow of the jet in the kitchen is organized in such a way that the holes in the water pipes are located in the wall and it is impossible to change this position.

The appearance of the kitchen faucet depends on the shape and length of the spout. To use the crane was convenient and comfortable, this item must meet certain criteria:

This feature is especially relevant for sinks with two or three bowls, so that it is convenient to use both containers. There are 3 types of rotation of such a part:

• 120 - 140 degrees for low-cost options;
• 180 degrees for medium range mixers;
• 360 degrees for expensive analogs.

The height of the "gander" should be optimal in order to be able to wash large-sized dishes, such as pots, cauldrons and trays. But if this element is too high, the liquid will spray out of the sink and fall on the walls and floor. This parameter must be selected taking into account the dimensions, shape and design of the sink.

The structure of the spout is of two types:

• solid cast - has high strength, due to the absence of joints, it rarely leaks;

• Prefabricated - more ergonomic to use, but requires special care. When choosing a model on the hinges, you should give preference to a proven brand that produces high-quality products.

There are both stationary models of nozzles, and flexible, the length and shape of which is amenable to change.

You can find faucets with two spouts, for example, if you need to draw water in a high saucepan, you can use the upper part, and use the bottom element for washing hands.

There are options for faucets, in which the spout extends, thanks to the presence of a stretching hose with a shower. Inside the faucet there is a retractable hose, which is connected to the shower head, in the usual position it is a spout head.

From what material the mixer is made of, its quality and its service life will depend on it.

The most popular models of cranes are made from the material:

Silumin (an alloy which includes aluminum and silicon) - differs in low cost. Disadvantages of such cranes:

• fragility;
• fragility;
• slightly demanding appearance.

Steel products with stainless chrome finish.

Distinctive characteristics of mixers from this material:

• increased wear resistance, as these metals do not corrode;
• do not change the chemical composition of water;
• strong;
• have a long service life.

The main advantages of models made from polymeric materials:

• acceptable price;
• have low thermal conductivity;
• excellent show themselves in the aquatic environment.

Ceramics - differ in stylish design, such products ideally fit into a diverse interior. Cons of this device:

• fragility and the possibility of cracks and chips from impact;
• quite high cost.

From the company that manufactures faucets for the kitchen, depends largely on the ease of use, as well as the durability of this product. Therefore it is worth stopping the choice on the checked brands which well proved in the market.

For example, in the mixers Zegor low lead content, so this product is safe to use. In addition, the spout can be rotated around its axis. The special design makes the valves and levers very comfortable to use, and due to the presence of an aerator, this faucet will save money on water bills.

Grohe (production is in Germany) - in the process of manufacturing mixers of this brand, modern technologies are used, allowing to produce functional and ergonomic devices of excellent quality;

Imprese (the country of release is the Czech Republic) - they are distinguished by good quality and reliability, as they are made of brass alloy;

Hansa (country of manufacture - Germany) - pays special attention to each element that is part of the crane. Innovative technologies are becoming the basis for the development of trendy and convenient products.

Mofem (production is in Hungary) - they are distinguished by a large variety of models, as well as high quality products, due to which they are in demand among Russian and European buyers.

Aquaton - a distinctive feature of this company - a variety of sizes of taps allows you to pick them up for both large and small kitchens;

Sanmix - mixers of this brand differ in ergonomic and functional characteristics that will appeal to Russian consumers;

Santekhpribor - the manufacturer guarantees high quality products, long-term use while maintaining the perfect appearance.

Frap - combine a good quality device and reasonable price. You can choose chrome or brass taps.

Calorie - the body of the mixer is made of brass and coated with chrome to protect the product from exposure to a humid environment. This brand produces ball and valve taps.

Choosing a mixer, I want to buy the best model. They will help to make a decision in favor of a crane customer reviews who already use it.

Consumers distinguish German-made mixers that are of high quality, stylish design and functionality.

Low cost options, users recommend to look at among domestic or Chinese counterparts.

It is necessary to approach the choice of the mixer for kitchen deliberately, and then it will serve not one ten years, keeping ideal appearance.